Imitha yokuHamba kwe-Electromagnetic edibeneyo MD-S451

Inkcazo emfutshane:

◆ Umlinganiselo awuchaphazeleki bubuninzi bolwelo, ukuxinana, ubushushu, uxinzelelo kunye nokuqhuba kombane.

◆ Akukho miqobo kwityhubhu yokulinganisa, akukho lahleko yoxinzelelo, akukho mfuneko iphantsi yecandelo lombhobho othe tye.

◆ Isiguquli sohlobo lwe-LCD backlight sinokuboniswa kwaye sifundwe lula elangeni okanye kwigumbi elimnyama.

◆ Imitha yokuhamba kwamanzi enenkqubo yokulinganisa imigca emibini, eyakhelwe ngaphakathi iitotali ezintathu: itotali epheleleyo, itotali ebuyela umva kunye nomahluko opheleleyo.

◆ Ineendlela ezahlukeneyo zokukhupha: i-current 4-20mA, i-pulse, i-rs-485, i-HART.

◆ Isiguquli sine-alamu yokuzixilonga, i-alamu yokubhaqa engenamthwalo, i-alamu yomda ophantsi nophezulu, ulawulo lwebhetshi (kufuneka yenziwe ngokwezifiso)

kunye neminye imisebenzi yokukhupha i-alamu.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Imitha yokuhamba kwamanzi ifanelekile kwiilwelo eziqhuba amanzi. Yenziwe yi-sensor kunye nenxalenye enobuchule yokuguqula amanzi. Imitha yokuhamba kwamanzi inokulinganisa ukuhamba komthamo weelwelo ezahlukeneyo eziqhuba amanzi. Imidiya elinganisiweyo ibandakanya i-asidi, i-alkali, ityuwa kunye ne-pulp yephepha, udaka, amanzi amdaka, amanzi olwandle, kunye nolwelo oluqinileyo. Ukongeza, i-sensor isebenzisa isakhiwo esivaliweyo esihlanganisiweyo, kwaye ityhubhu yokulinganisa kunye neqokobhe zihlanganisiwe, ezingangenisi manzi kwaye zingangeni manzi, kwaye zifanelekile ukufakwa kwindawo engaphantsi komhlaba okanye efumileyo.

IIPARAMETHA ZOBUGCISA

Indlela Esebenzayo	Iindidi ezahlukeneyo zolwelo oluqhubayo
Ububanzi obuqhelekileyo	DN6-DN3000mm
Isikhokelo sokuhamba komoya	Ukulinganisa ngeendlela ezimbini
Impazamo yokuphinda-phinda	± 0.1%
Ukuchaneka	± 0.5%FS
Isiphumo sesiginali	I-Pulse, 4-20mA, RS485, i-Modbus protocol; i-Hart protocol (ukhetho), i-Profibus DP (ukhetho)
Ubuntu bezizalwane	5%-90%
Ukunikezwa Amandla	I-DC24V (20-36V)
Ukunikezwa Amandla	I-AC220V (85-250V)
Izinto zokugquma	CR: -25-+60℃ (iyamelana nokuguguleka)
	I-PU: -25-+80℃ (Imelana nokuguguleka okunamandla)
	I-PTFE: -25-+120℃ (Imelana nokugqwala)
	I-FPM: -25-+180℃ (Imelana nobushushu obuphezulu)
	F46: -25-+ 180℃ (Ukumelana nokugqwala; Ukumelana noxinzelelo oluphezulu nolubi)
	I-PFA: -25-+ 180℃ (Ukumelana nokugqwala; Iyamelana noxinzelelo oluphezulu nolubi)
Izinto ze-electrode	316L (Akukho mhlwa/umhlwa obuthathaka)
	I-HB (Imelana ne-asidi engangxengiyo, i-alkali kunye netyuwa)
	I-HC (i-asidi enganyangekiyo yi-oxidation, i-alkali kunye netyuwa)
	I-Ti (iChloride)
	I-Ta (Ukumelana nokugqwala okunamandla)
	Pt (Faka phantse kuzo zonke iikhemikhali ngaphandle kwe-aqua regia kunye neetyuwa ze-ammonium)
Uxinzelelo Oluqhelekileyo	DN50≤M4.0Mpa
	DN65-DN250≤l.6Mpa
	DN300-DN1000≤1.0Mpa
	DN1200-DN2000≤0.6Mpa
	Okanye ezinye ezichazwe yi-odolo
Ibanga loKhuseleko	IP65; IP68

ISICELO

1. Umlinganiselo wokuhamba kwamanzi amdaka
2. Umlinganiselo wamanzi acocekileyo ajikeleza amanzi
3. Umlinganiselo wolwelo lwekhemikhali
4. Umlinganiselo wodaka kunye ne-ore slury
5. Ukuprinta kunye nokudaya, ukwenza i-electroplating, ukwenza iphepha, amayeza.