MD-G3051Meokon-Ubungqina bokuqhuma-ne-IP67-yeMveliso

Iiparameter ezisebenzayo:
1. Ububanzi bokusetyenziswa: ulwelo, igesi kunye nomphunga.
2. Isiphumo seSignali: Iinkqubo ezimbini zentambo 4 ~ 20mA isignali yeDC eyodwa ekhutshwe ngaphezulu kwesignali yedijithali ye-HART, imveliso yeengcambu ezithe nkqo okanye ezisikwere inokukhethwa, ubuninzi bomphumo wangoku awudluli kwi-22mA.
3. Umbane: DC 12 ~ 45V; Unxibelelwano lweHART, uluhlu lwevolthi yombane: 15.5 ~ 45V DC; Ivolthi yokusebenza ngokubanzi: 24V DC.
4. Uluhlu lomthwalo: Unxibelelwano lwe-HART, ukumelana kwisekethe yamandla kungaphezulu kwe-250 eYurophu, i-voltage yombane ingaphezulu kwe-15.5 volts.
5. Umgama wonxibelelwano: ububanzi bentambo yokudibanisa bukhulu kune-0.6mm, kwaye umgama wonxibelelwano umalunga ne-1500m.
6. Isixhobo sokubonisa: isibane esikrelekrele se-LCD esikrelekrele esikrelekrele esineedijithi ezi-5; Sebenzisa indibaniselwano ye
I-LCD Iisitshixo ze-M, Z, kunye ne-S kwisikrini sekristale yolwelo, isibonisi singaba sibonisi esijikelezayo okanye esizinzileyo: i-KPa, mA, %, mmH2O, MPa, Pa, bar, ATM, PSI, Torr kunye nezinye iiyunithi zobunjineli, zingasetyenziswa ngaphandle koxinzelelo lokutshintsha uluhlu lokulinganisa (ukufuduka okungenamsebenzi), ukuseta isiphumo sangoku esizinzileyo, ukuguqula ixesha lokudambisa, ukuseta isiphumo esithe ngqo, isikwere kunye ne-backup kunye nokubuyisela idatha kunye neminye imisebenzi.
7. Ukufuduka kwe-zero kunye noluhlu: umda osezantsi woluhlu lokulinganisa akufuneki ube ngaphantsi komda osezantsi woluhlu lokulinganisa oluphezulu, kwaye umda ophezulu akufuneki udlule umda ophezulu woluhlu lokulinganisa oluphezulu, oko kukuthi, uluhlu lokusebenza alufanele ludlule umda we-sensor. I-zero kunye noluhlu lunokubekwa kuyo nayiphi na indawo ehambelanayo ukusuka kwi-4 ukuya kwi-20mA.
Ukulungiswa koxinzelelo olungenaziro eziyi-8: sebenzisa iqhosha le-M+Z ukususa u-zero, ukulungisa utshintsho lwendawo yokufaka i-transmitter okanye ukushukuma okungenaziro okubangelwe yimpazamo, uxinzelelo lwe-transmitter lulungiswe ukuya kwixabiso loxinzelelo olungenaziro.
Ixabiso lokuxhathisa le-9: uluhlu oluhlengahlengiswayo lokudambisa nge-elektroniki lwemizuzwana eyi-0 ~ 32.
10. I-alamu yempazamo: Xa impazamo ifunyenwe yinkqubo yokuzixilonga, imveliso ye-analog ingaphezulu kwe-20.8mA okanye ingaphantsi kwe-3.9mA.
11. Ukubuyiswa kwedatha: xa idatha yonakele, idatha eyonakeleyo ingafunyanwa ngamaqhosha amathathu.
12. Imbuyekezo yobushushu: ikhompyutha iqokelela idatha yobushushu ize iyithumele kwi-transmitter ukuze ihlawule ubushushu.
13. Isalathisi sobushushu: sibonisa ixabiso lobushushu obungqongileyo bomthumeli.
14. Ubushushu bokusebenza: isekethe ye-elektroniki: -40 ~ +85ºC, kunye ne-LCD LCD: -30 ~ +80ºC; Into ebuthathaka (ezaliswe yioyile ye-silicone): -40 ~ +104ºC;
15 ubushushu bokugcina: -45 ~ +90ºC.
16. Ukhuseleko: KWAYE uyilo lokhuseleko lwesekethe, impembelelo echasene ne-static, umsinga womoya ohamba ngamandla, umsebenzi wokhuseleko olugqithisileyo unamandla.